Context Navigation

source: non-gtk/bash.3.2.bg.po@ 998

Last change on this file since 998 was 998, checked in by Александър Шопов, 19 years ago
r1008@kochinka: ash \| 2007-02-18 14:33:12 +0200 bash: първи 5 низа.
File size: 78.5 KB

Line
1	# Bulgarian translation of bash po-file.
2	# Copyright (C) 2007, Free Software Foundation, Inc.
3	# This file is distributed under the same license as the bash package.
4	# Alexander Shopov <ash@contact.bg>, 2007.
5	#
6	msgid ""
7	msgstr ""
8	"Project-Id-Version: bash 3.2\n"
9	"POT-Creation-Date: 2005-10-03 17:31-0400\n"
10	"PO-Revision-Date: 2007-02-18 14:32+0200\n"
11	"Last-Translator: Alexander Shopov <ash@contact.bg>\n"
12	"Language-Team: Bulgarian <dict@fsa-bg.org>\n"
13	"MIME-Version: 1.0\n"
14	"Content-Type: text/plain; charset=UTF-8\n"
15	"Content-Transfer-Encoding: 8bit\n"
16	"Plural-Forms: nplurals=2; plural=n != 1;\n"
17
18	#: arrayfunc.c:48
19	msgid "bad array subscript"
20	msgstr "неправилен индекс на масив"
21
22	#: arrayfunc.c:360
23	#, c-format
24	msgid "%s: cannot assign to non-numeric index"
25	msgstr "%s: не може да се присвоява на нецифров индекс"
26
27	#: bashhist.c:328
28	#, c-format
29	msgid "%s: cannot create: %s"
30	msgstr "%s: не може да се създаде: %s"
31
32	#: bashline.c:2947
33	msgid "bash_execute_unix_command: cannot find keymap for command"
34	msgstr ""
35
36	#: bashline.c:2996
37	#, c-format
38	msgid "%s: first non-whitespace character is not `\"'"
39	msgstr ""
40
41	#: bashline.c:3025
42	#, c-format
43	msgid "no closing `%c' in %s"
44	msgstr "липсва затвярящ знак „%c“ в %s"
45
46	#: bashline.c:3059
47	#, c-format
48	msgid "%s: missing colon separator"
49	msgstr "%s: разделителят двоеточие липсва"
50
51	#: builtins/bind.def:194
52	#, c-format
53	msgid "`%s': invalid keymap name"
54	msgstr ""
55
56	#: builtins/bind.def:233
57	#, c-format
58	msgid "%s: cannot read: %s"
59	msgstr "%s: не може да се прочете: %s"
60
61	#: builtins/bind.def:248
62	#, c-format
63	msgid "`%s': cannot unbind"
64	msgstr ""
65
66	#: builtins/bind.def:283
67	#, c-format
68	msgid "`%s': unknown function name"
69	msgstr ""
70
71	#: builtins/bind.def:291
72	#, c-format
73	msgid "%s is not bound to any keys.\n"
74	msgstr ""
75
76	#: builtins/bind.def:295
77	#, c-format
78	msgid "%s can be invoked via "
79	msgstr "%s може да се извика чрез "
80
81	#: builtins/break.def:128
82	msgid "only meaningful in a `for', `while', or `until' loop"
83	msgstr "валидно само за циклите с „for“, „while“ и „until“"
84
85	#: builtins/caller.def:132
86	msgid "Returns the context of the current subroutine call."
87	msgstr "Връща контекста на текущото извикване на подпрограма."
88
89	#: builtins/caller.def:133 builtins/caller.def:137 builtins/pushd.def:660
90	#: builtins/pushd.def:668 builtins/pushd.def:671 builtins/pushd.def:681
91	#: builtins/pushd.def:685 builtins/pushd.def:689 builtins/pushd.def:692
92	#: builtins/pushd.def:695 builtins/pushd.def:704 builtins/pushd.def:708
93	#: builtins/pushd.def:712 builtins/pushd.def:715
94	msgid " "
95	msgstr ""
96
97	#: builtins/caller.def:134
98	msgid "Without EXPR, returns returns \"$line $filename\". With EXPR,"
99	msgstr ""
100
101	#: builtins/caller.def:135
102	msgid "returns \"$line $subroutine $filename\"; this extra information"
103	msgstr ""
104
105	#: builtins/caller.def:136
106	msgid "can be used used to provide a stack trace."
107	msgstr ""
108
109	#: builtins/caller.def:138
110	msgid "The value of EXPR indicates how many call frames to go back before the"
111	msgstr ""
112
113	#: builtins/caller.def:139
114	msgid "current one; the top frame is frame 0."
115	msgstr ""
116
117	#: builtins/cd.def:203
118	msgid "HOME not set"
119	msgstr ""
120
121	#: builtins/cd.def:215
122	msgid "OLDPWD not set"
123	msgstr ""
124
125	#: builtins/common.c:133 test.c:921
126	msgid "too many arguments"
127	msgstr ""
128
129	#: builtins/common.c:157 shell.c:474 shell.c:747
130	#, c-format
131	msgid "%s: option requires an argument"
132	msgstr ""
133
134	#: builtins/common.c:164
135	#, c-format
136	msgid "%s: numeric argument required"
137	msgstr ""
138
139	#: builtins/common.c:171
140	#, c-format
141	msgid "%s: not found"
142	msgstr ""
143
144	#: builtins/common.c:180 shell.c:760
145	#, c-format
146	msgid "%s: invalid option"
147	msgstr ""
148
149	#: builtins/common.c:187
150	#, c-format
151	msgid "%s: invalid option name"
152	msgstr ""
153
154	#: builtins/common.c:194 general.c:231 general.c:236
155	#, c-format
156	msgid "`%s': not a valid identifier"
157	msgstr ""
158
159	#: builtins/common.c:201
160	#, c-format
161	msgid "%s: invalid number"
162	msgstr ""
163
164	#: builtins/common.c:208
165	#, c-format
166	msgid "%s: invalid signal specification"
167	msgstr ""
168
169	#: builtins/common.c:215
170	#, c-format
171	msgid "`%s': not a pid or valid job spec"
172	msgstr ""
173
174	#: builtins/common.c:222 error.c:453
175	#, c-format
176	msgid "%s: readonly variable"
177	msgstr ""
178
179	#: builtins/common.c:230
180	#, c-format
181	msgid "%s: %s out of range"
182	msgstr ""
183
184	#: builtins/common.c:230 builtins/common.c:232
185	msgid "argument"
186	msgstr ""
187
188	#: builtins/common.c:232
189	#, c-format
190	msgid "%s out of range"
191	msgstr ""
192
193	#: builtins/common.c:240
194	#, c-format
195	msgid "%s: no such job"
196	msgstr ""
197
198	#: builtins/common.c:248
199	#, c-format
200	msgid "%s: no job control"
201	msgstr ""
202
203	#: builtins/common.c:250
204	msgid "no job control"
205	msgstr ""
206
207	#: builtins/common.c:260
208	#, c-format
209	msgid "%s: restricted"
210	msgstr ""
211
212	#: builtins/common.c:262
213	msgid "restricted"
214	msgstr ""
215
216	#: builtins/common.c:270
217	#, c-format
218	msgid "%s: not a shell builtin"
219	msgstr ""
220
221	#: builtins/common.c:276
222	#, c-format
223	msgid "write error: %s"
224	msgstr ""
225
226	#: builtins/common.c:484
227	#, c-format
228	msgid "%s: error retrieving current directory: %s: %s\n"
229	msgstr ""
230
231	#: builtins/common.c:550 builtins/common.c:552
232	#, c-format
233	msgid "%s: ambiguous job spec"
234	msgstr ""
235
236	#: builtins/complete.def:251
237	#, c-format
238	msgid "%s: invalid action name"
239	msgstr ""
240
241	#: builtins/complete.def:381 builtins/complete.def:524
242	#, c-format
243	msgid "%s: no completion specification"
244	msgstr ""
245
246	#: builtins/complete.def:571
247	msgid "warning: -F option may not work as you expect"
248	msgstr ""
249
250	#: builtins/complete.def:573
251	msgid "warning: -C option may not work as you expect"
252	msgstr ""
253
254	#: builtins/declare.def:105
255	msgid "can only be used in a function"
256	msgstr ""
257
258	#: builtins/declare.def:301
259	msgid "cannot use `-f' to make functions"
260	msgstr ""
261
262	#: builtins/declare.def:313 execute_cmd.c:3986
263	#, c-format
264	msgid "%s: readonly function"
265	msgstr ""
266
267	#: builtins/declare.def:401
268	#, c-format
269	msgid "%s: cannot destroy array variables in this way"
270	msgstr ""
271
272	#: builtins/enable.def:128 builtins/enable.def:136
273	msgid "dynamic loading not available"
274	msgstr ""
275
276	#: builtins/enable.def:303
277	#, c-format
278	msgid "cannot open shared object %s: %s"
279	msgstr ""
280
281	#: builtins/enable.def:326
282	#, c-format
283	msgid "cannot find %s in shared object %s: %s"
284	msgstr ""
285
286	#: builtins/enable.def:450
287	#, c-format
288	msgid "%s: not dynamically loaded"
289	msgstr "%s: не е зареден динамично"
290
291	#: builtins/enable.def:465
292	#, c-format
293	msgid "%s: cannot delete: %s"
294	msgstr ""
295
296	#: builtins/evalfile.c:129 execute_cmd.c:3852 shell.c:1408
297	#, c-format
298	msgid "%s: is a directory"
299	msgstr ""
300
301	#: builtins/evalfile.c:134
302	#, c-format
303	msgid "%s: not a regular file"
304	msgstr "%s: не е обиновен файл"
305
306	#: builtins/evalfile.c:142
307	#, c-format
308	msgid "%s: file is too large"
309	msgstr "%s: файлът е прекалено голям"
310
311	#: builtins/exec.def:205
312	#, c-format
313	msgid "%s: cannot execute: %s"
314	msgstr "%s: не може да се изпълни: %s"
315
316	#: builtins/exit.def:83
317	msgid "not login shell: use `exit'"
318	msgstr ""
319
320	#: builtins/exit.def:111
321	msgid "There are stopped jobs.\n"
322	msgstr "Има спрени задачи.\n"
323
324	#: builtins/fc.def:259
325	msgid "no command found"
326	msgstr "не е открита команда"
327
328	#: builtins/fc.def:329
329	msgid "history specification"
330	msgstr ""
331
332	#: builtins/fc.def:350
333	#, c-format
334	msgid "%s: cannot open temp file: %s"
335	msgstr "%s: не може да се отвори временен файл: %s"
336
337	#: builtins/fg_bg.def:149
338	#, c-format
339	msgid "job %d started without job control"
340	msgstr "задача %d е стартирана без управление на задачите"
341
342	#: builtins/getopt.c:109
343	#, c-format
344	msgid "%s: illegal option -- %c\n"
345	msgstr ""
346
347	#: builtins/getopt.c:110
348	#, c-format
349	msgid "%s: option requires an argument -- %c\n"
350	msgstr ""
351
352	#: builtins/hash.def:83
353	msgid "hashing disabled"
354	msgstr ""
355
356	#: builtins/hash.def:128
357	#, c-format
358	msgid "%s: hash table empty\n"
359	msgstr ""
360
361	#: builtins/help.def:108
362	msgid "Shell commands matching keywords `"
363	msgstr ""
364
365	#: builtins/help.def:110
366	msgid "Shell commands matching keyword `"
367	msgstr ""
368
369	#: builtins/help.def:138
370	#, c-format
371	msgid ""
372	"no help topics match `%s'. Try `help help' or `man -k %s' or `info %s'."
373	msgstr ""
374
375	#: builtins/help.def:164
376	#, c-format
377	msgid "%s: cannot open: %s"
378	msgstr "%s: не може да се отвори: %s"
379
380	#: builtins/help.def:182
381	msgid ""
382	"These shell commands are defined internally. Type `help' to see this list.\n"
383	"Type `help name' to find out more about the function `name'.\n"
384	"Use `info bash' to find out more about the shell in general.\n"
385	"Use `man -k' or `info' to find out more about commands not in this list.\n"
386	"\n"
387	"A star (*) next to a name means that the command is disabled.\n"
388	"\n"
389	msgstr ""
390	"Тези команди на интерпретатора са дефинирани вътрешно.\n"
391	"Напишете „help“, за да видите списъка.\n"
392	"Напишете „help име_на_функция“ за повече информация за съответната функция.\n"
393	"Напишете „info bash“ за повече информация за обвивката като цяло.\n"
394	"Напишете „man -k“ или „info“ за повече информация за командите извън списъка.\n"
395	"\n"
396	"Звездичка (*) до името на комнанда, означава, че тя е изключена.\n"
397	"\n"
398
399	#: builtins/history.def:150
400	msgid "cannot use more than one of -anrw"
401	msgstr ""
402
403	#: builtins/history.def:182
404	msgid "history position"
405	msgstr ""
406
407	#: builtins/history.def:400
408	#, c-format
409	msgid "%s: history expansion failed"
410	msgstr ""
411
412	#: builtins/jobs.def:99
413	msgid "no other options allowed with `-x'"
414	msgstr "не е позволена друга опция с „-x“"
415
416	#: builtins/kill.def:187
417	#, c-format
418	msgid "%s: arguments must be process or job IDs"
419	msgstr "%s: аргументите трябва да са процеси или идентификатори на задачи"
420
421	#: builtins/kill.def:250
422	msgid "Unknown error"
423	msgstr "Неизвестна грешка"
424
425	#: builtins/let.def:94 builtins/let.def:119 expr.c:497 expr.c:512
426	msgid "expression expected"
427	msgstr "очаква се израз"
428
429	#: builtins/printf.def:327
430	#, c-format
431	msgid "`%s': missing format character"
432	msgstr "„%s“: липсва форматиращ знак"
433
434	#: builtins/printf.def:502
435	#, c-format
436	msgid "`%c': invalid format character"
437	msgstr "„%c“: грешен форматиращ знак"
438
439	#: builtins/printf.def:708
440	msgid "missing hex digit for \\x"
441	msgstr ""
442
443	#: builtins/pushd.def:173
444	msgid "no other directory"
445	msgstr ""
446
447	#: builtins/pushd.def:440
448	msgid "<no current directory>"
449	msgstr ""
450
451	#: builtins/pushd.def:657
452	msgid "Display the list of currently remembered directories. Directories"
453	msgstr ""
454
455	#: builtins/pushd.def:658
456	msgid "find their way onto the list with the `pushd' command; you can get"
457	msgstr ""
458
459	#: builtins/pushd.def:659
460	msgid "back up through the list with the `popd' command."
461	msgstr ""
462
463	#: builtins/pushd.def:661
464	msgid "The -l flag specifies that `dirs' should not print shorthand versions"
465	msgstr ""
466
467	#: builtins/pushd.def:662
468	msgid "of directories which are relative to your home directory. This means"
469	msgstr ""
470
471	#: builtins/pushd.def:663
472	msgid "that `~/bin' might be displayed as `/homes/bfox/bin'. The -v flag"
473	msgstr ""
474
475	#: builtins/pushd.def:664
476	msgid "causes `dirs' to print the directory stack with one entry per line,"
477	msgstr ""
478
479	#: builtins/pushd.def:665
480	msgid "prepending the directory name with its position in the stack. The -p"
481	msgstr ""
482
483	#: builtins/pushd.def:666
484	msgid "flag does the same thing, but the stack position is not prepended."
485	msgstr ""
486
487	#: builtins/pushd.def:667
488	msgid "The -c flag clears the directory stack by deleting all of the elements."
489	msgstr ""
490
491	#: builtins/pushd.def:669
492	msgid "+N displays the Nth entry counting from the left of the list shown by"
493	msgstr ""
494
495	#: builtins/pushd.def:670 builtins/pushd.def:673
496	msgid " dirs when invoked without options, starting with zero."
497	msgstr ""
498
499	#: builtins/pushd.def:672
500	msgid ""
501	"-N displays the Nth entry counting from the right of the list shown by"
502	msgstr ""
503
504	#: builtins/pushd.def:678
505	msgid "Adds a directory to the top of the directory stack, or rotates"
506	msgstr ""
507
508	#: builtins/pushd.def:679
509	msgid "the stack, making the new top of the stack the current working"
510	msgstr ""
511
512	#: builtins/pushd.def:680
513	msgid "directory. With no arguments, exchanges the top two directories."
514	msgstr ""
515
516	#: builtins/pushd.def:682
517	msgid "+N Rotates the stack so that the Nth directory (counting"
518	msgstr ""
519
520	#: builtins/pushd.def:683
521	msgid " from the left of the list shown by `dirs', starting with"
522	msgstr ""
523
524	#: builtins/pushd.def:684 builtins/pushd.def:688
525	msgid " zero) is at the top."
526	msgstr ""
527
528	#: builtins/pushd.def:686
529	msgid "-N Rotates the stack so that the Nth directory (counting"
530	msgstr ""
531
532	#: builtins/pushd.def:687
533	msgid " from the right of the list shown by `dirs', starting with"
534	msgstr ""
535
536	#: builtins/pushd.def:690
537	msgid "-n suppress the normal change of directory when adding directories"
538	msgstr ""
539
540	#: builtins/pushd.def:691
541	msgid " to the stack, so only the stack is manipulated."
542	msgstr ""
543
544	#: builtins/pushd.def:693
545	msgid "dir adds DIR to the directory stack at the top, making it the"
546	msgstr ""
547
548	#: builtins/pushd.def:694
549	msgid " new current working directory."
550	msgstr ""
551
552	#: builtins/pushd.def:696 builtins/pushd.def:716
553	msgid "You can see the directory stack with the `dirs' command."
554	msgstr ""
555
556	#: builtins/pushd.def:701
557	msgid "Removes entries from the directory stack. With no arguments,"
558	msgstr ""
559
560	#: builtins/pushd.def:702
561	msgid "removes the top directory from the stack, and cd's to the new"
562	msgstr ""
563
564	#: builtins/pushd.def:703
565	msgid "top directory."
566	msgstr ""
567
568	#: builtins/pushd.def:705
569	msgid "+N removes the Nth entry counting from the left of the list"
570	msgstr ""
571
572	#: builtins/pushd.def:706
573	msgid " shown by `dirs', starting with zero. For example: `popd +0'"
574	msgstr ""
575
576	#: builtins/pushd.def:707
577	msgid " removes the first directory, `popd +1' the second."
578	msgstr ""
579
580	#: builtins/pushd.def:709
581	msgid "-N removes the Nth entry counting from the right of the list"
582	msgstr ""
583
584	#: builtins/pushd.def:710
585	msgid " shown by `dirs', starting with zero. For example: `popd -0'"
586	msgstr ""
587
588	#: builtins/pushd.def:711
589	msgid " removes the last directory, `popd -1' the next to last."
590	msgstr ""
591
592	#: builtins/pushd.def:713
593	msgid "-n suppress the normal change of directory when removing directories"
594	msgstr ""
595
596	#: builtins/pushd.def:714
597	msgid " from the stack, so only the stack is manipulated."
598	msgstr ""
599
600	#: builtins/read.def:211
601	#, c-format
602	msgid "%s: invalid timeout specification"
603	msgstr ""
604
605	#: builtins/read.def:234
606	#, c-format
607	msgid "%s: invalid file descriptor specification"
608	msgstr ""
609
610	#: builtins/read.def:241
611	#, c-format
612	msgid "%d: invalid file descriptor: %s"
613	msgstr ""
614
615	#: builtins/read.def:474
616	#, c-format
617	msgid "read error: %d: %s"
618	msgstr "грешка при четене: %d: %s"
619
620	#: builtins/return.def:63
621	msgid "can only `return' from a function or sourced script"
622	msgstr ""
623
624	#: builtins/set.def:745
625	msgid "cannot simultaneously unset a function and a variable"
626	msgstr ""
627
628	#: builtins/set.def:782
629	#, c-format
630	msgid "%s: cannot unset"
631	msgstr ""
632
633	#: builtins/set.def:789
634	#, c-format
635	msgid "%s: cannot unset: readonly %s"
636	msgstr ""
637
638	#: builtins/set.def:800
639	#, c-format
640	msgid "%s: not an array variable"
641	msgstr ""
642
643	#: builtins/setattr.def:166
644	#, c-format
645	msgid "%s: not a function"
646	msgstr "%s: не е функция"
647
648	#: builtins/shift.def:66 builtins/shift.def:72
649	msgid "shift count"
650	msgstr ""
651
652	#: builtins/shopt.def:227
653	msgid "cannot set and unset shell options simultaneously"
654	msgstr ""
655
656	#: builtins/shopt.def:292
657	#, c-format
658	msgid "%s: invalid shell option name"
659	msgstr ""
660
661	#: builtins/source.def:117
662	msgid "filename argument required"
663	msgstr "изисква се аргумент име на файл"
664
665	#: builtins/source.def:137
666	#, c-format
667	msgid "%s: file not found"
668	msgstr "%s: файлът не е открит"
669
670	#: builtins/suspend.def:93
671	msgid "cannot suspend"
672	msgstr ""
673
674	#: builtins/suspend.def:103
675	msgid "cannot suspend a login shell"
676	msgstr ""
677
678	#: builtins/type.def:232
679	#, c-format
680	msgid "%s is aliased to `%s'\n"
681	msgstr ""
682
683	#: builtins/type.def:253
684	#, c-format
685	msgid "%s is a shell keyword\n"
686	msgstr ""
687
688	#: builtins/type.def:273
689	#, c-format
690	msgid "%s is a function\n"
691	msgstr ""
692
693	#: builtins/type.def:298
694	#, c-format
695	msgid "%s is a shell builtin\n"
696	msgstr ""
697
698	#: builtins/type.def:319
699	#, c-format
700	msgid "%s is %s\n"
701	msgstr "%s е %s\n"
702
703	#: builtins/type.def:339
704	#, c-format
705	msgid "%s is hashed (%s)\n"
706	msgstr ""
707
708	#: builtins/ulimit.def:344
709	#, c-format
710	msgid "%s: invalid limit argument"
711	msgstr ""
712
713	#: builtins/ulimit.def:370
714	#, c-format
715	msgid "`%c': bad command"
716	msgstr ""
717
718	#: builtins/ulimit.def:399
719	#, c-format
720	msgid "%s: cannot get limit: %s"
721	msgstr ""
722
723	#: builtins/ulimit.def:437
724	#, c-format
725	msgid "%s: cannot modify limit: %s"
726	msgstr ""
727
728	#: builtins/umask.def:112
729	msgid "octal number"
730	msgstr "осмично число"
731
732	#: builtins/umask.def:226
733	#, c-format
734	msgid "`%c': invalid symbolic mode operator"
735	msgstr ""
736
737	#: builtins/umask.def:281
738	#, c-format
739	msgid "`%c': invalid symbolic mode character"
740	msgstr ""
741
742	#: error.c:165
743	#, c-format
744	msgid "last command: %s\n"
745	msgstr "последна команда: %s\n"
746
747	#: error.c:173
748	msgid "Aborting..."
749	msgstr ""
750
751	#: error.c:260
752	#, c-format
753	msgid "%s: warning: "
754	msgstr "%s: предупреждение: "
755
756	#: error.c:405
757	msgid "unknown command error"
758	msgstr "неизвестна грешка в команда"
759
760	#: error.c:406
761	msgid "bad command type"
762	msgstr "неправилен ви команда"
763
764	#: error.c:407
765	msgid "bad connector"
766	msgstr ""
767
768	#: error.c:408
769	msgid "bad jump"
770	msgstr ""
771
772	#: error.c:446
773	#, c-format
774	msgid "%s: unbound variable"
775	msgstr ""
776
777	#: eval.c:176
778	msgid "timed out waiting for input: auto-logout\n"
779	msgstr ""
780
781	#: execute_cmd.c:471
782	#, c-format
783	msgid "cannot redirect standard input from /dev/null: %s"
784	msgstr ""
785
786	#: execute_cmd.c:1036
787	#, c-format
788	msgid "TIMEFORMAT: `%c': invalid format character"
789	msgstr ""
790
791	#: execute_cmd.c:3551
792	#, c-format
793	msgid "%s: restricted: cannot specify `/' in command names"
794	msgstr ""
795
796	#: execute_cmd.c:3639
797	#, c-format
798	msgid "%s: command not found"
799	msgstr ""
800
801	#: execute_cmd.c:3876
802	#, c-format
803	msgid "%s: %s: bad interpreter"
804	msgstr ""
805
806	#: execute_cmd.c:3913
807	#, c-format
808	msgid "%s: cannot execute binary file"
809	msgstr ""
810
811	#: execute_cmd.c:4025
812	#, c-format
813	msgid "cannot duplicate fd %d to fd %d"
814	msgstr ""
815
816	#: expr.c:240
817	msgid "expression recursion level exceeded"
818	msgstr ""
819
820	#: expr.c:264
821	msgid "recursion stack underflow"
822	msgstr ""
823
824	#: expr.c:375
825	msgid "syntax error in expression"
826	msgstr ""
827
828	#: expr.c:415
829	msgid "attempted assignment to non-variable"
830	msgstr ""
831
832	#: expr.c:436 expr.c:441 expr.c:751
833	msgid "division by 0"
834	msgstr ""
835
836	#: expr.c:467
837	msgid "bug: bad expassign token"
838	msgstr ""
839
840	#: expr.c:509
841	msgid "`:' expected for conditional expression"
842	msgstr ""
843
844	#: expr.c:776
845	msgid "exponent less than 0"
846	msgstr ""
847
848	#: expr.c:821
849	msgid "identifier expected after pre-increment or pre-decrement"
850	msgstr ""
851
852	#: expr.c:849
853	msgid "missing `)'"
854	msgstr ""
855
856	#: expr.c:892
857	msgid "syntax error: operand expected"
858	msgstr ""
859
860	#: expr.c:1178
861	msgid "invalid number"
862	msgstr ""
863
864	#: expr.c:1182
865	msgid "invalid arithmetic base"
866	msgstr ""
867
868	#: expr.c:1202
869	msgid "value too great for base"
870	msgstr ""
871
872	#: general.c:62
873	msgid "getcwd: cannot access parent directories"
874	msgstr ""
875
876	#: input.c:231
877	#, c-format
878	msgid "cannot allocate new file descriptor for bash input from fd %d"
879	msgstr ""
880
881	#: input.c:239
882	#, c-format
883	msgid "save_bash_input: buffer already exists for new fd %d"
884	msgstr ""
885
886	#: jobs.c:923
887	#, c-format
888	msgid "deleting stopped job %d with process group %ld"
889	msgstr ""
890
891	#: jobs.c:1308
892	#, c-format
893	msgid "describe_pid: %ld: no such pid"
894	msgstr ""
895
896	#: jobs.c:1981 nojobs.c:648
897	#, c-format
898	msgid "wait: pid %ld is not a child of this shell"
899	msgstr ""
900
901	#: jobs.c:2180
902	#, c-format
903	msgid "wait_for: No record of process %ld"
904	msgstr ""
905
906	#: jobs.c:2435
907	#, c-format
908	msgid "wait_for_job: job %d is stopped"
909	msgstr ""
910
911	#: jobs.c:2657
912	#, c-format
913	msgid "%s: job has terminated"
914	msgstr ""
915
916	#: jobs.c:2666
917	#, c-format
918	msgid "%s: job %d already in background"
919	msgstr ""
920
921	#: jobs.c:3452
922	msgid "no job control in this shell"
923	msgstr ""
924
925	#: lib/malloc/malloc.c:298
926	#, c-format
927	msgid "malloc: failed assertion: %s\n"
928	msgstr ""
929
930	#: lib/malloc/malloc.c:314
931	#, c-format
932	msgid ""
933	"\r\n"
934	"malloc: %s:%d: assertion botched\r\n"
935	msgstr ""
936
937	#: lib/malloc/malloc.c:740
938	msgid "malloc: block on free list clobbered"
939	msgstr ""
940
941	#: lib/malloc/malloc.c:817
942	msgid "free: called with already freed block argument"
943	msgstr ""
944
945	#: lib/malloc/malloc.c:820
946	msgid "free: called with unallocated block argument"
947	msgstr ""
948
949	#: lib/malloc/malloc.c:839
950	msgid "free: underflow detected; mh_nbytes out of range"
951	msgstr ""
952
953	#: lib/malloc/malloc.c:845
954	msgid "free: start and end chunk sizes differ"
955	msgstr ""
956
957	#: lib/malloc/malloc.c:942
958	msgid "realloc: called with unallocated block argument"
959	msgstr ""
960
961	#: lib/malloc/malloc.c:957
962	msgid "realloc: underflow detected; mh_nbytes out of range"
963	msgstr ""
964
965	#: lib/malloc/malloc.c:963
966	msgid "realloc: start and end chunk sizes differ"
967	msgstr ""
968
969	#: lib/malloc/table.c:175
970	msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
971	msgstr ""
972
973	#: lib/malloc/table.c:182
974	#, c-format
975	msgid "register_alloc: %p already in table as allocated?\n"
976	msgstr ""
977
978	#: lib/malloc/table.c:218
979	#, c-format
980	msgid "register_free: %p already in table as free?\n"
981	msgstr ""
982
983	#: lib/malloc/watch.c:46
984	msgid "allocated"
985	msgstr ""
986
987	#: lib/malloc/watch.c:48
988	msgid "freed"
989	msgstr ""
990
991	#: lib/malloc/watch.c:50
992	msgid "requesting resize"
993	msgstr ""
994
995	#: lib/malloc/watch.c:52
996	msgid "just resized"
997	msgstr ""
998
999	#: lib/malloc/watch.c:54
1000	msgid "bug: unknown operation"
1001	msgstr ""
1002
1003	#: lib/malloc/watch.c:56
1004	#, c-format
1005	msgid "malloc: watch alert: %p %s "
1006	msgstr ""
1007
1008	#: lib/sh/fmtulong.c:101
1009	msgid "invalid base"
1010	msgstr ""
1011
1012	#: lib/sh/netopen.c:158
1013	#, c-format
1014	msgid "%s: host unknown"
1015	msgstr ""
1016
1017	#: lib/sh/netopen.c:165
1018	#, c-format
1019	msgid "%s: invalid service"
1020	msgstr ""
1021
1022	#: lib/sh/netopen.c:296
1023	#, c-format
1024	msgid "%s: bad network path specification"
1025	msgstr ""
1026
1027	#: lib/sh/netopen.c:336
1028	msgid "network operations not supported"
1029	msgstr ""
1030
1031	#: mailcheck.c:386
1032	msgid "You have mail in $_"
1033	msgstr ""
1034
1035	#: mailcheck.c:411
1036	msgid "You have new mail in $_"
1037	msgstr ""
1038
1039	#: mailcheck.c:427
1040	#, c-format
1041	msgid "The mail in %s has been read\n"
1042	msgstr ""
1043
1044	#: make_cmd.c:322
1045	msgid "syntax error: arithmetic expression required"
1046	msgstr ""
1047
1048	#: make_cmd.c:324
1049	msgid "syntax error: `;' unexpected"
1050	msgstr ""
1051
1052	#: make_cmd.c:325
1053	#, c-format
1054	msgid "syntax error: `((%s))'"
1055	msgstr ""
1056
1057	#: make_cmd.c:566
1058	#, c-format
1059	msgid "make_here_document: bad instruction type %d"
1060	msgstr ""
1061
1062	#: make_cmd.c:736
1063	#, c-format
1064	msgid "make_redirection: redirection instruction `%d' out of range"
1065	msgstr ""
1066
1067	#: parse.y:2747
1068	#, c-format
1069	msgid "unexpected EOF while looking for matching `%c'"
1070	msgstr ""
1071
1072	#: parse.y:3043
1073	msgid "unexpected EOF while looking for `]]'"
1074	msgstr ""
1075
1076	#: parse.y:3048
1077	#, c-format
1078	msgid "syntax error in conditional expression: unexpected token `%s'"
1079	msgstr ""
1080
1081	#: parse.y:3052
1082	msgid "syntax error in conditional expression"
1083	msgstr ""
1084
1085	#: parse.y:3130
1086	#, c-format
1087	msgid "unexpected token `%s', expected `)'"
1088	msgstr ""
1089
1090	#: parse.y:3134
1091	msgid "expected `)'"
1092	msgstr ""
1093
1094	#: parse.y:3162
1095	#, c-format
1096	msgid "unexpected argument `%s' to conditional unary operator"
1097	msgstr ""
1098
1099	#: parse.y:3166
1100	msgid "unexpected argument to conditional unary operator"
1101	msgstr ""
1102
1103	#: parse.y:3203
1104	#, c-format
1105	msgid "unexpected token `%s', conditional binary operator expected"
1106	msgstr ""
1107
1108	#: parse.y:3207
1109	msgid "conditional binary operator expected"
1110	msgstr ""
1111
1112	#: parse.y:3223
1113	#, c-format
1114	msgid "unexpected argument `%s' to conditional binary operator"
1115	msgstr ""
1116
1117	#: parse.y:3227
1118	msgid "unexpected argument to conditional binary operator"
1119	msgstr ""
1120
1121	#: parse.y:3238
1122	#, c-format
1123	msgid "unexpected token `%c' in conditional command"
1124	msgstr ""
1125
1126	#: parse.y:3241
1127	#, c-format
1128	msgid "unexpected token `%s' in conditional command"
1129	msgstr ""
1130
1131	#: parse.y:3245
1132	#, c-format
1133	msgid "unexpected token %d in conditional command"
1134	msgstr ""
1135
1136	#: parse.y:4461
1137	#, c-format
1138	msgid "syntax error near unexpected token `%s'"
1139	msgstr ""
1140
1141	#: parse.y:4479
1142	#, c-format
1143	msgid "syntax error near `%s'"
1144	msgstr ""
1145
1146	#: parse.y:4489
1147	msgid "syntax error: unexpected end of file"
1148	msgstr ""
1149
1150	#: parse.y:4489
1151	msgid "syntax error"
1152	msgstr ""
1153
1154	#: parse.y:4551
1155	#, c-format
1156	msgid "Use \"%s\" to leave the shell.\n"
1157	msgstr ""
1158
1159	#: parse.y:4710
1160	msgid "unexpected EOF while looking for matching `)'"
1161	msgstr ""
1162
1163	#: pcomplete.c:1001
1164	#, c-format
1165	msgid "completion: function `%s' not found"
1166	msgstr ""
1167
1168	#: pcomplib.c:179
1169	#, c-format
1170	msgid "progcomp_insert: %s: NULL COMPSPEC"
1171	msgstr ""
1172
1173	#: print_cmd.c:264
1174	#, c-format
1175	msgid "print_command: bad connector `%d'"
1176	msgstr ""
1177
1178	#: print_cmd.c:1236
1179	#, c-format
1180	msgid "cprintf: `%c': invalid format character"
1181	msgstr ""
1182
1183	#: redir.c:99
1184	msgid "file descriptor out of range"
1185	msgstr ""
1186
1187	#: redir.c:141
1188	#, c-format
1189	msgid "%s: ambiguous redirect"
1190	msgstr ""
1191
1192	#: redir.c:145
1193	#, c-format
1194	msgid "%s: cannot overwrite existing file"
1195	msgstr ""
1196
1197	#: redir.c:150
1198	#, c-format
1199	msgid "%s: restricted: cannot redirect output"
1200	msgstr ""
1201
1202	#: redir.c:155
1203	#, c-format
1204	msgid "cannot create temp file for here document: %s"
1205	msgstr ""
1206
1207	#: redir.c:509
1208	msgid "/dev/(tcp\|udp)/host/port not supported without networking"
1209	msgstr ""
1210
1211	#: redir.c:956
1212	msgid "redirection error: cannot duplicate fd"
1213	msgstr ""
1214
1215	#: shell.c:309
1216	msgid "could not find /tmp, please create!"
1217	msgstr ""
1218
1219	#: shell.c:313
1220	msgid "/tmp must be a valid directory name"
1221	msgstr ""
1222
1223	#: shell.c:849
1224	#, c-format
1225	msgid "%c%c: invalid option"
1226	msgstr ""
1227
1228	#: shell.c:1598
1229	msgid "I have no name!"
1230	msgstr ""
1231
1232	#: shell.c:1733
1233	#, c-format
1234	msgid ""
1235	"Usage:\t%s [GNU long option] [option] ...\n"
1236	"\t%s [GNU long option] [option] script-file ...\n"
1237	msgstr ""
1238
1239	#: shell.c:1735
1240	msgid "GNU long options:\n"
1241	msgstr ""
1242
1243	#: shell.c:1739
1244	msgid "Shell options:\n"
1245	msgstr ""
1246
1247	#: shell.c:1740
1248	msgid "\t-irsD or -c command or -O shopt_option\t\t(invocation only)\n"
1249	msgstr ""
1250
1251	#: shell.c:1755
1252	#, c-format
1253	msgid "\t-%s or -o option\n"
1254	msgstr ""
1255
1256	#: shell.c:1761
1257	#, c-format
1258	msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
1259	msgstr ""
1260
1261	#: shell.c:1762
1262	#, c-format
1263	msgid "Type `%s -c help' for more information about shell builtin commands.\n"
1264	msgstr ""
1265
1266	#: shell.c:1763
1267	msgid "Use the `bashbug' command to report bugs.\n"
1268	msgstr ""
1269
1270	#: sig.c:494
1271	#, c-format
1272	msgid "sigprocmask: %d: invalid operation"
1273	msgstr ""
1274
1275	#: subst.c:1123
1276	#, c-format
1277	msgid "bad substitution: no closing `%s' in %s"
1278	msgstr ""
1279
1280	#: subst.c:2269
1281	#, c-format
1282	msgid "%s: cannot assign list to array member"
1283	msgstr ""
1284
1285	#: subst.c:4208 subst.c:4224
1286	msgid "cannot make pipe for process substitution"
1287	msgstr ""
1288
1289	#: subst.c:4255
1290	msgid "cannot make child for process substitution"
1291	msgstr ""
1292
1293	#: subst.c:4300
1294	#, c-format
1295	msgid "cannot open named pipe %s for reading"
1296	msgstr ""
1297
1298	#: subst.c:4302
1299	#, c-format
1300	msgid "cannot open named pipe %s for writing"
1301	msgstr ""
1302
1303	#: subst.c:4310
1304	#, c-format
1305	msgid "cannout reset nodelay mode for fd %d"
1306	msgstr ""
1307
1308	#: subst.c:4320
1309	#, c-format
1310	msgid "cannot duplicate named pipe %s as fd %d"
1311	msgstr ""
1312
1313	#: subst.c:4495
1314	msgid "cannot make pipe for command substitution"
1315	msgstr ""
1316
1317	#: subst.c:4531
1318	msgid "cannot make child for command substitution"
1319	msgstr ""
1320
1321	#: subst.c:4548
1322	msgid "command_substitute: cannot duplicate pipe as fd 1"
1323	msgstr ""
1324
1325	#: subst.c:5013
1326	#, c-format
1327	msgid "%s: parameter null or not set"
1328	msgstr ""
1329
1330	#: subst.c:5287
1331	#, c-format
1332	msgid "%s: substring expression < 0"
1333	msgstr ""
1334
1335	#: subst.c:6058
1336	#, c-format
1337	msgid "%s: bad substitution"
1338	msgstr ""
1339
1340	#: subst.c:6134
1341	#, c-format
1342	msgid "$%s: cannot assign in this way"
1343	msgstr ""
1344
1345	#: subst.c:7687
1346	#, c-format
1347	msgid "no match: %s"
1348	msgstr ""
1349
1350	#: test.c:154
1351	msgid "argument expected"
1352	msgstr ""
1353
1354	#: test.c:163
1355	#, c-format
1356	msgid "%s: integer expression expected"
1357	msgstr ""
1358
1359	#: test.c:361
1360	msgid "`)' expected"
1361	msgstr "очаква се „)“"
1362
1363	#: test.c:363
1364	#, c-format
1365	msgid "`)' expected, found %s"
1366	msgstr "очаква се „)“, а е получено %s"
1367
1368	#: test.c:378 test.c:787 test.c:790
1369	#, c-format
1370	msgid "%s: unary operator expected"
1371	msgstr ""
1372
1373	#: test.c:543 test.c:830
1374	#, c-format
1375	msgid "%s: binary operator expected"
1376	msgstr ""
1377
1378	#: test.c:905
1379	msgid "missing `]'"
1380	msgstr "липсва „]“"
1381
1382	#: trap.c:194
1383	msgid "invalid signal number"
1384	msgstr "неправилен номер на сигнал"
1385
1386	#: trap.c:309
1387	#, c-format
1388	msgid "run_pending_traps: bad value in trap_list[%d]: %p"
1389	msgstr ""
1390
1391	#: trap.c:313
1392	#, c-format
1393	msgid ""
1394	"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
1395	msgstr ""
1396
1397	#: trap.c:349
1398	#, c-format
1399	msgid "trap_handler: bad signal %d"
1400	msgstr ""
1401
1402	#: variables.c:320
1403	#, c-format
1404	msgid "error importing function definition for `%s'"
1405	msgstr ""
1406
1407	#: variables.c:692
1408	#, c-format
1409	msgid "shell level (%d) too high, resetting to 1"
1410	msgstr ""
1411
1412	#: variables.c:1651
1413	msgid "make_local_variable: no function context at current scope"
1414	msgstr ""
1415
1416	#: variables.c:2807
1417	msgid "all_local_variables: no function context at current scope"
1418	msgstr ""
1419
1420	#: variables.c:3021 variables.c:3030
1421	#, c-format
1422	msgid "invalid character %d in exportstr for %s"
1423	msgstr ""
1424
1425	#: variables.c:3036
1426	#, c-format
1427	msgid "no `=' in exportstr for %s"
1428	msgstr ""
1429
1430	#: variables.c:3463
1431	msgid "pop_var_context: head of shell_variables not a function context"
1432	msgstr ""
1433
1434	#: variables.c:3476
1435	msgid "pop_var_context: no global_variables context"
1436	msgstr ""
1437
1438	#: variables.c:3548
1439	msgid "pop_scope: head of shell_variables not a temporary environment scope"
1440	msgstr ""
1441
1442	#: version.c:82
1443	msgid "Copyright (C) 2005 Free Software Foundation, Inc.\n"
1444	msgstr "Авторски права (C) 2005 Free Software Foundation, Inc.\n"
1445
1446	#: xmalloc.c:93
1447	#, c-format
1448	msgid "xmalloc: cannot allocate %lu bytes (%lu bytes allocated)"
1449	msgstr "xmalloc: %lu байта не могат да се заделят (заделени са %lu байта)"
1450
1451	#: xmalloc.c:95
1452	#, c-format
1453	msgid "xmalloc: cannot allocate %lu bytes"
1454	msgstr "xmalloc: %lu байта не могат да се заделят"
1455
1456	#: xmalloc.c:115
1457	#, c-format
1458	msgid "xrealloc: cannot reallocate %lu bytes (%lu bytes allocated)"
1459	msgstr "xrealloc: %lu байта не могат да се заделят наново (заделени са %lu байта)"
1460
1461	#: xmalloc.c:117
1462	#, c-format
1463	msgid "xrealloc: cannot allocate %lu bytes"
1464	msgstr "xrealloc: %lu байта не могат да се заделят"
1465
1466	#: xmalloc.c:151
1467	#, c-format
1468	msgid "xmalloc: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
1469	msgstr "xmalloc: %s:%d: %lu байта не могат да се заделят (заделени са %lu байта)"
1470
1471	#: xmalloc.c:153
1472	#, c-format
1473	msgid "xmalloc: %s:%d: cannot allocate %lu bytes"
1474	msgstr "xmalloc: %s:%d: %lu байта не могат да се заделят"
1475
1476	#: xmalloc.c:175
1477	#, c-format
1478	msgid "xrealloc: %s:%d: cannot reallocate %lu bytes (%lu bytes allocated)"
1479	msgstr "xrealloc: %s:%d: %lu байта не могат да се заделят (заделени са %lu байта)"
1480
1481	#: xmalloc.c:177
1482	#, c-format
1483	msgid "xrealloc: %s:%d: cannot allocate %lu bytes"
1484	msgstr "xrealloc: %s:%d: %lu байта не могат да се заделят"
1485
1486	#: builtins.c:244
1487	msgid ""
1488	" `alias' with no arguments or with the -p option prints the list\n"
1489	" of aliases in the form alias NAME=VALUE on standard output.\n"
1490	" Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
1491	" A trailing space in VALUE causes the next word to be checked for\n"
1492	" alias substitution when the alias is expanded. Alias returns\n"
1493	" true unless a NAME is given for which no alias has been defined."
1494	msgstr ""
1495
1496	#: builtins.c:257
1497	msgid ""
1498	" Remove NAMEs from the list of defined aliases. If the -a option is given,\n"
1499	" then remove all alias definitions."
1500	msgstr ""
1501
1502	#: builtins.c:266
1503	msgid ""
1504	" Bind a key sequence to a Readline function or a macro, or set\n"
1505	" a Readline variable. The non-option argument syntax is equivalent\n"
1506	" to that found in ~/.inputrc, but must be passed as a single argument:\n"
1507	" bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
1508	" bind accepts the following options:\n"
1509	" -m keymap Use `keymap' as the keymap for the duration of "
1510	"this\n"
1511	" command. Acceptable keymap names are emacs,\n"
1512	" emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
1513	"move,\n"
1514	" vi-command, and vi-insert.\n"
1515	" -l List names of functions.\n"
1516	" -P List function names and bindings.\n"
1517	" -p List functions and bindings in a form that can be\n"
1518	" reused as input.\n"
1519	" -r keyseq Remove the binding for KEYSEQ.\n"
1520	" -x keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
1521	" \t\t\t\tKEYSEQ is entered.\n"
1522	" -f filename Read key bindings from FILENAME.\n"
1523	" -q function-name Query about which keys invoke the named function.\n"
1524	" -u function-name Unbind all keys which are bound to the named "
1525	"function.\n"
1526	" -V List variable names and values\n"
1527	" -v List variable names and values in a form that can\n"
1528	" be reused as input.\n"
1529	" -S List key sequences that invoke macros and their "
1530	"values\n"
1531	" -s List key sequences that invoke macros and their "
1532	"values\n"
1533	" in a form that can be reused as input."
1534	msgstr ""
1535
1536	#: builtins.c:297
1537	msgid ""
1538	" Exit from within a FOR, WHILE or UNTIL loop. If N is specified,\n"
1539	" break N levels."
1540	msgstr ""
1541
1542	#: builtins.c:304
1543	msgid ""
1544	" Resume the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
1545	" If N is specified, resume at the N-th enclosing loop."
1546	msgstr ""
1547
1548	#: builtins.c:311
1549	msgid ""
1550	" Run a shell builtin. This is useful when you wish to rename a\n"
1551	" shell builtin to be a function, but need the functionality of the\n"
1552	" builtin within the function itself."
1553	msgstr ""
1554
1555	#: builtins.c:320
1556	msgid ""
1557	" Returns the context of the current subroutine call.\n"
1558	" \n"
1559	" Without EXPR, returns returns \"$line $filename\". With EXPR,\n"
1560	" returns \"$line $subroutine $filename\"; this extra information\n"
1561	" can be used used to provide a stack trace.\n"
1562	" \n"
1563	" The value of EXPR indicates how many call frames to go back before the\n"
1564	" current one; the top frame is frame 0."
1565	msgstr ""
1566
1567	#: builtins.c:334
1568	msgid ""
1569	" Change the current directory to DIR. The variable $HOME is the\n"
1570	" default DIR. The variable CDPATH defines the search path for\n"
1571	" the directory containing DIR. Alternative directory names in CDPATH\n"
1572	" are separated by a colon (:). A null directory name is the same as\n"
1573	" the current directory, i.e. `.'. If DIR begins with a slash (/),\n"
1574	" then CDPATH is not used. If the directory is not found, and the\n"
1575	" shell option `cdable_vars' is set, then try the word as a variable\n"
1576	" name. If that variable has a value, then cd to the value of that\n"
1577	" variable. The -P option says to use the physical directory structure\n"
1578	" instead of following symbolic links; the -L option forces symbolic "
1579	"links\n"
1580	" to be followed."
1581	msgstr ""
1582
1583	#: builtins.c:350
1584	msgid ""
1585	" Print the current working directory. With the -P option, pwd prints\n"
1586	" the physical directory, without any symbolic links; the -L option\n"
1587	" makes pwd follow symbolic links."
1588	msgstr ""
1589
1590	#: builtins.c:358
1591	msgid " No effect; the command does nothing. A zero exit code is returned."
1592	msgstr ""
1593
1594	#: builtins.c:364
1595	msgid " Return a successful result."
1596	msgstr ""
1597
1598	#: builtins.c:370
1599	msgid " Return an unsuccessful result."
1600	msgstr ""
1601
1602	#: builtins.c:376
1603	msgid ""
1604	" Runs COMMAND with ARGS ignoring shell functions. If you have a shell\n"
1605	" function called `ls', and you wish to call the command `ls', you can\n"
1606	" say \"command ls\". If the -p option is given, a default value is used\n"
1607	" for PATH that is guaranteed to find all of the standard utilities. If\n"
1608	" the -V or -v option is given, a string is printed describing COMMAND.\n"
1609	" The -V option produces a more verbose description."
1610	msgstr ""
1611
1612	#: builtins.c:387
1613	msgid ""
1614	" Declare variables and/or give them attributes. If no NAMEs are\n"
1615	" given, then display the values of variables instead. The -p option\n"
1616	" will display the attributes and values of each NAME.\n"
1617	" \n"
1618	" The flags are:\n"
1619	" \n"
1620	" -a\tto make NAMEs arrays (if supported)\n"
1621	" -f\tto select from among function names only\n"
1622	" -F\tto display function names (and line number and source file name "
1623	"if\n"
1624	" \tdebugging) without definitions\n"
1625	" -i\tto make NAMEs have the `integer' attribute\n"
1626	" -r\tto make NAMEs readonly\n"
1627	" -t\tto make NAMEs have the `trace' attribute\n"
1628	" -x\tto make NAMEs export\n"
1629	" \n"
1630	" Variables with the integer attribute have arithmetic evaluation (see\n"
1631	" `let') done when the variable is assigned to.\n"
1632	" \n"
1633	" When displaying values of variables, -f displays a function's name\n"
1634	" and definition. The -F option restricts the display to function\n"
1635	" name only.\n"
1636	" \n"
1637	" Using `+' instead of `-' turns off the given attribute instead. When\n"
1638	" used in a function, makes NAMEs local, as with the `local' command."
1639	msgstr ""
1640
1641	#: builtins.c:416
1642	msgid " Obsolete. See `declare'."
1643	msgstr " Остаряло, да не се използва. Виж „declare“."
1644
1645	#: builtins.c:422
1646	msgid ""
1647	" Create a local variable called NAME, and give it VALUE. LOCAL\n"
1648	" can only be used within a function; it makes the variable NAME\n"
1649	" have a visible scope restricted to that function and its children."
1650	msgstr ""
1651
1652	#: builtins.c:431
1653	msgid ""
1654	" Output the ARGs. If -n is specified, the trailing newline is\n"
1655	" suppressed. If the -e option is given, interpretation of the\n"
1656	" following backslash-escaped characters is turned on:\n"
1657	" \t\\a\talert (bell)\n"
1658	" \t\\b\tbackspace\n"
1659	" \t\\c\tsuppress trailing newline\n"
1660	" \t\\E\tescape character\n"
1661	" \t\\f\tform feed\n"
1662	" \t\\n\tnew line\n"
1663	" \t\\r\tcarriage return\n"
1664	" \t\\t\thorizontal tab\n"
1665	" \t\\v\tvertical tab\n"
1666	" \t\\\\\tbackslash\n"
1667	" \t\\num\tthe character whose ASCII code is NUM (octal).\n"
1668	" \n"
1669	" You can explicitly turn off the interpretation of the above characters\n"
1670	" with the -E option."
1671	msgstr ""
1672
1673	#: builtins.c:455
1674	msgid ""
1675	" Output the ARGs. If -n is specified, the trailing newline is suppressed."
1676	msgstr ""
1677
1678	#: builtins.c:462
1679	msgid ""
1680	" Enable and disable builtin shell commands. This allows\n"
1681	" you to use a disk command which has the same name as a shell\n"
1682	" builtin without specifying a full pathname. If -n is used, the\n"
1683	" NAMEs become disabled; otherwise NAMEs are enabled. For example,\n"
1684	" to use the `test' found in $PATH instead of the shell builtin\n"
1685	" version, type `enable -n test'. On systems supporting dynamic\n"
1686	" loading, the -f option may be used to load new builtins from the\n"
1687	" shared object FILENAME. The -d option will delete a builtin\n"
1688	" previously loaded with -f. If no non-option names are given, or\n"
1689	" the -p option is supplied, a list of builtins is printed. The\n"
1690	" -a option means to print every builtin with an indication of whether\n"
1691	" or not it is enabled. The -s option restricts the output to the "
1692	"POSIX.2\n"
1693	" `special' builtins. The -n option displays a list of all disabled "
1694	"builtins."
1695	msgstr ""
1696
1697	#: builtins.c:480
1698	msgid " Read ARGs as input to the shell and execute the resulting command(s)."
1699	msgstr ""
1700
1701	#: builtins.c:486
1702	msgid ""
1703	" Getopts is used by shell procedures to parse positional parameters.\n"
1704	" \n"
1705	" OPTSTRING contains the option letters to be recognized; if a letter\n"
1706	" is followed by a colon, the option is expected to have an argument,\n"
1707	" which should be separated from it by white space.\n"
1708	" \n"
1709	" Each time it is invoked, getopts will place the next option in the\n"
1710	" shell variable $name, initializing name if it does not exist, and\n"
1711	" the index of the next argument to be processed into the shell\n"
1712	" variable OPTIND. OPTIND is initialized to 1 each time the shell or\n"
1713	" a shell script is invoked. When an option requires an argument,\n"
1714	" getopts places that argument into the shell variable OPTARG.\n"
1715	" \n"
1716	" getopts reports errors in one of two ways. If the first character\n"
1717	" of OPTSTRING is a colon, getopts uses silent error reporting. In\n"
1718	" this mode, no error messages are printed. If an invalid option is\n"
1719	" seen, getopts places the option character found into OPTARG. If a\n"
1720	" required argument is not found, getopts places a ':' into NAME and\n"
1721	" sets OPTARG to the option character found. If getopts is not in\n"
1722	" silent mode, and an invalid option is seen, getopts places '?' into\n"
1723	" NAME and unsets OPTARG. If a required argument is not found, a '?'\n"
1724	" is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
1725	" printed.\n"
1726	" \n"
1727	" If the shell variable OPTERR has the value 0, getopts disables the\n"
1728	" printing of error messages, even if the first character of\n"
1729	" OPTSTRING is not a colon. OPTERR has the value 1 by default.\n"
1730	" \n"
1731	" Getopts normally parses the positional parameters ($0 - $9), but if\n"
1732	" more arguments are given, they are parsed instead."
1733	msgstr ""
1734
1735	#: builtins.c:521
1736	msgid ""
1737	" Exec FILE, replacing this shell with the specified program.\n"
1738	" If FILE is not specified, the redirections take effect in this\n"
1739	" shell. If the first argument is `-l', then place a dash in the\n"
1740	" zeroth arg passed to FILE, as login does. If the `-c' option\n"
1741	" is supplied, FILE is executed with a null environment. The `-a'\n"
1742	" option means to make set argv[0] of the executed process to NAME.\n"
1743	" If the file cannot be executed and the shell is not interactive,\n"
1744	" then the shell exits, unless the shell option `execfail' is set."
1745	msgstr ""
1746
1747	#: builtins.c:534
1748	msgid ""
1749	" Exit the shell with a status of N. If N is omitted, the exit status\n"
1750	" is that of the last command executed."
1751	msgstr ""
1752
1753	#: builtins.c:541
1754	msgid " Logout of a login shell."
1755	msgstr ""
1756
1757	#: builtins.c:548
1758	msgid ""
1759	" fc is used to list or edit and re-execute commands from the history list.\n"
1760	" FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
1761	" string, which means the most recent command beginning with that\n"
1762	" string.\n"
1763	" \n"
1764	" -e ENAME selects which editor to use. Default is FCEDIT, then "
1765	"EDITOR,\n"
1766	" then vi.\n"
1767	" \n"
1768	" -l means list lines instead of editing.\n"
1769	" -n means no line numbers listed.\n"
1770	" -r means reverse the order of the lines (making it newest listed "
1771	"first).\n"
1772	" \n"
1773	" With the `fc -s [pat=rep ...] [command]' format, the command is\n"
1774	" re-executed after the substitution OLD=NEW is performed.\n"
1775	" \n"
1776	" A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
1777	" runs the last command beginning with `cc' and typing `r' re-executes\n"
1778	" the last command."
1779	msgstr ""
1780
1781	#: builtins.c:573
1782	msgid ""
1783	" Place JOB_SPEC in the foreground, and make it the current job. If\n"
1784	" JOB_SPEC is not present, the shell's notion of the current job is\n"
1785	" used."
1786	msgstr ""
1787
1788	#: builtins.c:583
1789	msgid ""
1790	" Place each JOB_SPEC in the background, as if it had been started with\n"
1791	" `&'. If JOB_SPEC is not present, the shell's notion of the current\n"
1792	" job is used."
1793	msgstr ""
1794
1795	#: builtins.c:592
1796	msgid ""
1797	" For each NAME, the full pathname of the command is determined and\n"
1798	" remembered. If the -p option is supplied, PATHNAME is used as the\n"
1799	" full pathname of NAME, and no path search is performed. The -r\n"
1800	" option causes the shell to forget all remembered locations. The -d\n"
1801	" option causes the shell to forget the remembered location of each NAME.\n"
1802	" If the -t option is supplied the full pathname to which each NAME\n"
1803	" corresponds is printed. If multiple NAME arguments are supplied with\n"
1804	" -t, the NAME is printed before the hashed full pathname. The -l option\n"
1805	" causes output to be displayed in a format that may be reused as input.\n"
1806	" If no arguments are given, information about remembered commands is "
1807	"displayed."
1808	msgstr ""
1809
1810	#: builtins.c:608
1811	msgid ""
1812	" Display helpful information about builtin commands. If PATTERN is\n"
1813	" specified, gives detailed help on all commands matching PATTERN,\n"
1814	" otherwise a list of the builtins is printed. The -s option\n"
1815	" restricts the output for each builtin command matching PATTERN to\n"
1816	" a short usage synopsis."
1817	msgstr ""
1818
1819	#: builtins.c:620
1820	msgid ""
1821	" Display the history list with line numbers. Lines listed with\n"
1822	" with a `*' have been modified. Argument of N says to list only\n"
1823	" the last N lines. The `-c' option causes the history list to be\n"
1824	" cleared by deleting all of the entries. The `-d' option deletes\n"
1825	" the history entry at offset OFFSET. The `-w' option writes out the\n"
1826	" current history to the history file; `-r' means to read the file and\n"
1827	" append the contents to the history list instead. `-a' means\n"
1828	" to append history lines from this session to the history file.\n"
1829	" Argument `-n' means to read all history lines not already read\n"
1830	" from the history file and append them to the history list.\n"
1831	" \n"
1832	" If FILENAME is given, then that is used as the history file else\n"
1833	" if $HISTFILE has a value, that is used, else ~/.bash_history.\n"
1834	" If the -s option is supplied, the non-option ARGs are appended to\n"
1835	" the history list as a single entry. The -p option means to perform\n"
1836	" history expansion on each ARG and display the result, without storing\n"
1837	" anything in the history list.\n"
1838	" \n"
1839	" If the $HISTTIMEFORMAT variable is set and not null, its value is used\n"
1840	" as a format string for strftime(3) to print the time stamp associated\n"
1841	" with each displayed history entry. No time stamps are printed otherwise."
1842	msgstr ""
1843
1844	#: builtins.c:648
1845	msgid ""
1846	" Lists the active jobs. The -l option lists process id's in addition\n"
1847	" to the normal information; the -p option lists process id's only.\n"
1848	" If -n is given, only processes that have changed status since the last\n"
1849	" notification are printed. JOBSPEC restricts output to that job. The\n"
1850	" -r and -s options restrict output to running and stopped jobs only,\n"
1851	" respectively. Without options, the status of all active jobs is\n"
1852	" printed. If -x is given, COMMAND is run after all job specifications\n"
1853	" that appear in ARGS have been replaced with the process ID of that "
1854	"job's\n"
1855	" process group leader."
1856	msgstr ""
1857
1858	#: builtins.c:664
1859	msgid ""
1860	" By default, removes each JOBSPEC argument from the table of active jobs.\n"
1861	" If the -h option is given, the job is not removed from the table, but "
1862	"is\n"
1863	" marked so that SIGHUP is not sent to the job if the shell receives a\n"
1864	" SIGHUP. The -a option, when JOBSPEC is not supplied, means to remove "
1865	"all\n"
1866	" jobs from the job table; the -r option means to remove only running jobs."
1867	msgstr ""
1868
1869	#: builtins.c:675
1870	msgid ""
1871	" Send the processes named by PID (or JOBSPEC) the signal SIGSPEC. If\n"
1872	" SIGSPEC is not present, then SIGTERM is assumed. An argument of `-l'\n"
1873	" lists the signal names; if arguments follow `-l' they are assumed to\n"
1874	" be signal numbers for which names should be listed. Kill is a shell\n"
1875	" builtin for two reasons: it allows job IDs to be used instead of\n"
1876	" process IDs, and, if you have reached the limit on processes that\n"
1877	" you can create, you don't have to start a process to kill another one."
1878	msgstr ""
1879
1880	#: builtins.c:687
1881	msgid ""
1882	" Each ARG is an arithmetic expression to be evaluated. Evaluation\n"
1883	" is done in fixed-width integers with no check for overflow, though\n"
1884	" division by 0 is trapped and flagged as an error. The following\n"
1885	" list of operators is grouped into levels of equal-precedence operators.\n"
1886	" The levels are listed in order of decreasing precedence.\n"
1887	" \n"
1888	" \tid++, id--\tvariable post-increment, post-decrement\n"
1889	" \t++id, --id\tvariable pre-increment, pre-decrement\n"
1890	" \t-, +\t\tunary minus, plus\n"
1891	" \t!, ~\t\tlogical and bitwise negation\n"
1892	" \t**\t\texponentiation\n"
1893	" \t*, /, %\t\tmultiplication, division, remainder\n"
1894	" \t+, -\t\taddition, subtraction\n"
1895	" \t<<, >>\t\tleft and right bitwise shifts\n"
1896	" \t<=, >=, <, >\tcomparison\n"
1897	" \t==, !=\t\tequality, inequality\n"
1898	" \t&\t\tbitwise AND\n"
1899	" \t^\t\tbitwise XOR\n"
1900	" \t\|\t\tbitwise OR\n"
1901	" \t&&\t\tlogical AND\n"
1902	" \t\|\|\t\tlogical OR\n"
1903	" \texpr ? expr : expr\n"
1904	" \t\t\tconditional operator\n"
1905	" \t=, *=, /=, %=,\n"
1906	" \t+=, -=, <<=, >>=,\n"
1907	" \t&=, ^=, \|=\tassignment\n"
1908	" \n"
1909	" Shell variables are allowed as operands. The name of the variable\n"
1910	" is replaced by its value (coerced to a fixed-width integer) within\n"
1911	" an expression. The variable need not have its integer attribute\n"
1912	" turned on to be used in an expression.\n"
1913	" \n"
1914	" Operators are evaluated in order of precedence. Sub-expressions in\n"
1915	" parentheses are evaluated first and may override the precedence\n"
1916	" rules above.\n"
1917	" \n"
1918	" If the last ARG evaluates to 0, let returns 1; 0 is returned\n"
1919	" otherwise."
1920	msgstr ""
1921
1922	#: builtins.c:730
1923	msgid ""
1924	" One line is read from the standard input, or from file descriptor FD if "
1925	"the\n"
1926	" -u option is supplied, and the first word is assigned to the first "
1927	"NAME,\n"
1928	" the second word to the second NAME, and so on, with leftover words "
1929	"assigned\n"
1930	" to the last NAME. Only the characters found in $IFS are recognized as "
1931	"word\n"
1932	" delimiters. If no NAMEs are supplied, the line read is stored in the "
1933	"REPLY\n"
1934	" variable. If the -r option is given, this signifies `raw' input, and\n"
1935	" backslash escaping is disabled. The -d option causes read to continue\n"
1936	" until the first character of DELIM is read, rather than newline. If the "
1937	"-p\n"
1938	" option is supplied, the string PROMPT is output without a trailing "
1939	"newline\n"
1940	" before attempting to read. If -a is supplied, the words read are "
1941	"assigned\n"
1942	" to sequential indices of ARRAY, starting at zero. If -e is supplied "
1943	"and\n"
1944	" the shell is interactive, readline is used to obtain the line. If -n "
1945	"is\n"
1946	" supplied with a non-zero NCHARS argument, read returns after NCHARS\n"
1947	" characters have been read. The -s option causes input coming from a\n"
1948	" terminal to not be echoed.\n"
1949	" \n"
1950	" The -t option causes read to time out and return failure if a complete "
1951	"line\n"
1952	" of input is not read within TIMEOUT seconds. If the TMOUT variable is "
1953	"set,\n"
1954	" its value is the default timeout. The return code is zero, unless end-"
1955	"of-file\n"
1956	" is encountered, read times out, or an invalid file descriptor is "
1957	"supplied as\n"
1958	" the argument to -u."
1959	msgstr ""
1960
1961	#: builtins.c:756
1962	msgid ""
1963	" Causes a function to exit with the return value specified by N. If N\n"
1964	" is omitted, the return status is that of the last command."
1965	msgstr ""
1966
1967	#: builtins.c:763
1968	msgid ""
1969	" -a Mark variables which are modified or created for export.\n"
1970	" -b Notify of job termination immediately.\n"
1971	" -e Exit immediately if a command exits with a non-zero status.\n"
1972	" -f Disable file name generation (globbing).\n"
1973	" -h Remember the location of commands as they are looked up.\n"
1974	" -k All assignment arguments are placed in the environment for a\n"
1975	" command, not just those that precede the command name.\n"
1976	" -m Job control is enabled.\n"
1977	" -n Read commands but do not execute them.\n"
1978	" -o option-name\n"
1979	" Set the variable corresponding to option-name:\n"
1980	" allexport same as -a\n"
1981	" braceexpand same as -B\n"
1982	" emacs use an emacs-style line editing interface\n"
1983	" errexit same as -e\n"
1984	" errtrace same as -E\n"
1985	" functrace same as -T\n"
1986	" hashall same as -h\n"
1987	" histexpand same as -H\n"
1988	" history enable command history\n"
1989	" ignoreeof the shell will not exit upon reading EOF\n"
1990	" interactive-comments\n"
1991	" allow comments to appear in interactive "
1992	"commands\n"
1993	" keyword same as -k\n"
1994	" monitor same as -m\n"
1995	" noclobber same as -C\n"
1996	" noexec same as -n\n"
1997	" noglob same as -f\n"
1998	" nolog currently accepted but ignored\n"
1999	" notify same as -b\n"
2000	" nounset same as -u\n"
2001	" onecmd same as -t\n"
2002	" physical same as -P\n"
2003	" pipefail the return value of a pipeline is the status "
2004	"of\n"
2005	" the last command to exit with a non-zero "
2006	"status,\n"
2007	" or zero if no command exited with a non-zero "
2008	"status\n"
2009	" posix change the behavior of bash where the default\n"
2010	" operation differs from the 1003.2 standard to\n"
2011	" match the standard\n"
2012	" privileged same as -p\n"
2013	" verbose same as -v\n"
2014	" vi use a vi-style line editing interface\n"
2015	" xtrace same as -x\n"
2016	" -p Turned on whenever the real and effective user ids do not "
2017	"match.\n"
2018	" Disables processing of the $ENV file and importing of shell\n"
2019	" functions. Turning this option off causes the effective uid "
2020	"and\n"
2021	" gid to be set to the real uid and gid.\n"
2022	" -t Exit after reading and executing one command.\n"
2023	" -u Treat unset variables as an error when substituting.\n"
2024	" -v Print shell input lines as they are read.\n"
2025	" -x Print commands and their arguments as they are executed.\n"
2026	" -B the shell will perform brace expansion\n"
2027	" -C If set, disallow existing regular files to be overwritten\n"
2028	" by redirection of output.\n"
2029	" -E If set, the ERR trap is inherited by shell functions.\n"
2030	" -H Enable ! style history substitution. This flag is on\n"
2031	" by default when the shell is interactive.\n"
2032	" -P If set, do not follow symbolic links when executing commands\n"
2033	" such as cd which change the current directory.\n"
2034	" -T If set, the DEBUG trap is inherited by shell functions.\n"
2035	" - Assign any remaining arguments to the positional parameters.\n"
2036	" The -x and -v options are turned off.\n"
2037	" \n"
2038	" Using + rather than - causes these flags to be turned off. The\n"
2039	" flags can also be used upon invocation of the shell. The current\n"
2040	" set of flags may be found in $-. The remaining n ARGs are positional\n"
2041	" parameters and are assigned, in order, to $1, $2, .. $n. If no\n"
2042	" ARGs are given, all shell variables are printed."
2043	msgstr ""
2044
2045	#: builtins.c:836
2046	msgid ""
2047	" For each NAME, remove the corresponding variable or function. Given\n"
2048	" the `-v', unset will only act on variables. Given the `-f' flag,\n"
2049	" unset will only act on functions. With neither flag, unset first\n"
2050	" tries to unset a variable, and if that fails, then tries to unset a\n"
2051	" function. Some variables cannot be unset; also see readonly."
2052	msgstr ""
2053
2054	#: builtins.c:846
2055	msgid ""
2056	" NAMEs are marked for automatic export to the environment of\n"
2057	" subsequently executed commands. If the -f option is given,\n"
2058	" the NAMEs refer to functions. If no NAMEs are given, or if `-p'\n"
2059	" is given, a list of all names that are exported in this shell is\n"
2060	" printed. An argument of `-n' says to remove the export property\n"
2061	" from subsequent NAMEs. An argument of `--' disables further option\n"
2062	" processing."
2063	msgstr ""
2064
2065	#: builtins.c:858
2066	msgid ""
2067	" The given NAMEs are marked readonly and the values of these NAMEs may\n"
2068	" not be changed by subsequent assignment. If the -f option is given,\n"
2069	" then functions corresponding to the NAMEs are so marked. If no\n"
2070	" arguments are given, or if `-p' is given, a list of all readonly names\n"
2071	" is printed. The `-a' option means to treat each NAME as\n"
2072	" an array variable. An argument of `--' disables further option\n"
2073	" processing."
2074	msgstr ""
2075
2076	#: builtins.c:870
2077	msgid ""
2078	" The positional parameters from $N+1 ... are renamed to $1 ... If N is\n"
2079	" not given, it is assumed to be 1."
2080	msgstr ""
2081
2082	#: builtins.c:877 builtins.c:886
2083	msgid ""
2084	" Read and execute commands from FILENAME and return. The pathnames\n"
2085	" in $PATH are used to find the directory containing FILENAME. If any\n"
2086	" ARGUMENTS are supplied, they become the positional parameters when\n"
2087	" FILENAME is executed."
2088	msgstr ""
2089
2090	#: builtins.c:896
2091	msgid ""
2092	" Suspend the execution of this shell until it receives a SIGCONT\n"
2093	" signal. The `-f' if specified says not to complain about this\n"
2094	" being a login shell if it is; just suspend anyway."
2095	msgstr ""
2096
2097	#: builtins.c:905
2098	msgid ""
2099	" Exits with a status of 0 (true) or 1 (false) depending on\n"
2100	" the evaluation of EXPR. Expressions may be unary or binary. Unary\n"
2101	" expressions are often used to examine the status of a file. There\n"
2102	" are string operators as well, and numeric comparison operators.\n"
2103	" \n"
2104	" File operators:\n"
2105	" \n"
2106	" -a FILE True if file exists.\n"
2107	" -b FILE True if file is block special.\n"
2108	" -c FILE True if file is character special.\n"
2109	" -d FILE True if file is a directory.\n"
2110	" -e FILE True if file exists.\n"
2111	" -f FILE True if file exists and is a regular file.\n"
2112	" -g FILE True if file is set-group-id.\n"
2113	" -h FILE True if file is a symbolic link.\n"
2114	" -L FILE True if file is a symbolic link.\n"
2115	" -k FILE True if file has its `sticky' bit set.\n"
2116	" -p FILE True if file is a named pipe.\n"
2117	" -r FILE True if file is readable by you.\n"
2118	" -s FILE True if file exists and is not empty.\n"
2119	" -S FILE True if file is a socket.\n"
2120	" -t FD True if FD is opened on a terminal.\n"
2121	" -u FILE True if the file is set-user-id.\n"
2122	" -w FILE True if the file is writable by you.\n"
2123	" -x FILE True if the file is executable by you.\n"
2124	" -O FILE True if the file is effectively owned by you.\n"
2125	" -G FILE True if the file is effectively owned by your group.\n"
2126	" -N FILE True if the file has been modified since it was last "
2127	"read.\n"
2128	" \n"
2129	" FILE1 -nt FILE2 True if file1 is newer than file2 (according to\n"
2130	" modification date).\n"
2131	" \n"
2132	" FILE1 -ot FILE2 True if file1 is older than file2.\n"
2133	" \n"
2134	" FILE1 -ef FILE2 True if file1 is a hard link to file2.\n"
2135	" \n"
2136	" String operators:\n"
2137	" \n"
2138	" -z STRING True if string is empty.\n"
2139	" \n"
2140	" -n STRING\n"
2141	" STRING True if string is not empty.\n"
2142	" \n"
2143	" STRING1 = STRING2\n"
2144	" True if the strings are equal.\n"
2145	" STRING1 != STRING2\n"
2146	" True if the strings are not equal.\n"
2147	" STRING1 < STRING2\n"
2148	" True if STRING1 sorts before STRING2 "
2149	"lexicographically.\n"
2150	" STRING1 > STRING2\n"
2151	" True if STRING1 sorts after STRING2 "
2152	"lexicographically.\n"
2153	" \n"
2154	" Other operators:\n"
2155	" \n"
2156	" -o OPTION True if the shell option OPTION is enabled.\n"
2157	" ! EXPR True if expr is false.\n"
2158	" EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
2159	" EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
2160	" \n"
2161	" arg1 OP arg2 Arithmetic tests. OP is one of -eq, -ne,\n"
2162	" -lt, -le, -gt, or -ge.\n"
2163	" \n"
2164	" Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
2165	" less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
2166	" than ARG2."
2167	msgstr ""
2168
2169	#: builtins.c:975
2170	msgid ""
2171	" This is a synonym for the \"test\" builtin, but the last\n"
2172	" argument must be a literal `]', to match the opening `['."
2173	msgstr ""
2174
2175	#: builtins.c:982
2176	msgid ""
2177	" Print the accumulated user and system times for processes run from\n"
2178	" the shell."
2179	msgstr ""
2180
2181	#: builtins.c:989
2182	msgid ""
2183	" The command ARG is to be read and executed when the shell receives\n"
2184	" signal(s) SIGNAL_SPEC. If ARG is absent (and a single SIGNAL_SPEC\n"
2185	" is supplied) or `-', each specified signal is reset to its original\n"
2186	" value. If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
2187	" shell and by the commands it invokes. If a SIGNAL_SPEC is EXIT (0)\n"
2188	" the command ARG is executed on exit from the shell. If a SIGNAL_SPEC\n"
2189	" is DEBUG, ARG is executed after every simple command. If the`-p' "
2190	"option\n"
2191	" is supplied then the trap commands associated with each SIGNAL_SPEC are\n"
2192	" displayed. If no arguments are supplied or if only `-p' is given, trap\n"
2193	" prints the list of commands associated with each signal. Each "
2194	"SIGNAL_SPEC\n"
2195	" is either a signal name in <signal.h> or a signal number. Signal names\n"
2196	" are case insensitive and the SIG prefix is optional. `trap -l' prints\n"
2197	" a list of signal names and their corresponding numbers. Note that a\n"
2198	" signal can be sent to the shell with \"kill -signal $$\"."
2199	msgstr ""
2200
2201	#: builtins.c:1008
2202	msgid ""
2203	" For each NAME, indicate how it would be interpreted if used as a\n"
2204	" command name.\n"
2205	" \n"
2206	" If the -t option is used, `type' outputs a single word which is one of\n"
2207	" `alias', `keyword', `function', `builtin', `file' or `', if NAME is an\n"
2208	" alias, shell reserved word, shell function, shell builtin, disk file,\n"
2209	" or unfound, respectively.\n"
2210	" \n"
2211	" If the -p flag is used, `type' either returns the name of the disk\n"
2212	" file that would be executed, or nothing if `type -t NAME' would not\n"
2213	" return `file'.\n"
2214	" \n"
2215	" If the -a flag is used, `type' displays all of the places that contain\n"
2216	" an executable named `file'. This includes aliases, builtins, and\n"
2217	" functions, if and only if the -p flag is not also used.\n"
2218	" \n"
2219	" The -f flag suppresses shell function lookup.\n"
2220	" \n"
2221	" The -P flag forces a PATH search for each NAME, even if it is an alias,\n"
2222	" builtin, or function, and returns the name of the disk file that would\n"
2223	" be executed."
2224	msgstr ""
2225
2226	#: builtins.c:1035
2227	msgid ""
2228	" Ulimit provides control over the resources available to processes\n"
2229	" started by the shell, on systems that allow such control. If an\n"
2230	" option is given, it is interpreted as follows:\n"
2231	" \n"
2232	" -S\tuse the `soft' resource limit\n"
2233	" -H\tuse the `hard' resource limit\n"
2234	" -a\tall current limits are reported\n"
2235	" -c\tthe maximum size of core files created\n"
2236	" -d\tthe maximum size of a process's data segment\n"
2237	" -f\tthe maximum size of files created by the shell\n"
2238	" -i the maximum number of pending signals\n"
2239	" -l\tthe maximum size a process may lock into memory\n"
2240	" -m\tthe maximum resident set size\n"
2241	" -n\tthe maximum number of open file descriptors\n"
2242	" -p\tthe pipe buffer size\n"
2243	" -q the maximum number of bytes in POSIX message queues\n"
2244	" -s\tthe maximum stack size\n"
2245	" -t\tthe maximum amount of cpu time in seconds\n"
2246	" -u\tthe maximum number of user processes\n"
2247	" -v\tthe size of virtual memory\n"
2248	" -x the maximum number of file locks\n"
2249	" \n"
2250	" If LIMIT is given, it is the new value of the specified resource;\n"
2251	" the special LIMIT values `soft', `hard', and `unlimited' stand for\n"
2252	" the current soft limit, the current hard limit, and no limit, "
2253	"respectively.\n"
2254	" Otherwise, the current value of the specified resource is printed.\n"
2255	" If no option is given, then -f is assumed. Values are in 1024-byte\n"
2256	" increments, except for -t, which is in seconds, -p, which is in\n"
2257	" increments of 512 bytes, and -u, which is an unscaled number of\n"
2258	" processes."
2259	msgstr ""
2260
2261	#: builtins.c:1071
2262	msgid ""
2263	" The user file-creation mask is set to MODE. If MODE is omitted, or if\n"
2264	" `-S' is supplied, the current value of the mask is printed. The `-S'\n"
2265	" option makes the output symbolic; otherwise an octal number is output.\n"
2266	" If `-p' is supplied, and MODE is omitted, the output is in a form\n"
2267	" that may be used as input. If MODE begins with a digit, it is\n"
2268	" interpreted as an octal number, otherwise it is a symbolic mode string\n"
2269	" like that accepted by chmod(1)."
2270	msgstr ""
2271
2272	#: builtins.c:1084
2273	msgid ""
2274	" Wait for the specified process and report its termination status. If\n"
2275	" N is not given, all currently active child processes are waited for,\n"
2276	" and the return code is zero. N may be a process ID or a job\n"
2277	" specification; if a job spec is given, all processes in the job's\n"
2278	" pipeline are waited for."
2279	msgstr ""
2280
2281	#: builtins.c:1096
2282	msgid ""
2283	" Wait for the specified process and report its termination status. If\n"
2284	" N is not given, all currently active child processes are waited for,\n"
2285	" and the return code is zero. N is a process ID; if it is not given,\n"
2286	" all child processes of the shell are waited for."
2287	msgstr ""
2288
2289	#: builtins.c:1106
2290	msgid ""
2291	" The `for' loop executes a sequence of commands for each member in a\n"
2292	" list of items. If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
2293	" assumed. For each element in WORDS, NAME is set to that element, and\n"
2294	" the COMMANDS are executed."
2295	msgstr ""
2296
2297	#: builtins.c:1115
2298	msgid ""
2299	" Equivalent to\n"
2300	" \t(( EXP1 ))\n"
2301	" \twhile (( EXP2 )); do\n"
2302	" \t\tCOMMANDS\n"
2303	" \t\t(( EXP3 ))\n"
2304	" \tdone\n"
2305	" EXP1, EXP2, and EXP3 are arithmetic expressions. If any expression is\n"
2306	" omitted, it behaves as if it evaluates to 1."
2307	msgstr ""
2308
2309	#: builtins.c:1128
2310	msgid ""
2311	" The WORDS are expanded, generating a list of words. The\n"
2312	" set of expanded words is printed on the standard error, each\n"
2313	" preceded by a number. If `in WORDS' is not present, `in \"$@\"'\n"
2314	" is assumed. The PS3 prompt is then displayed and a line read\n"
2315	" from the standard input. If the line consists of the number\n"
2316	" corresponding to one of the displayed words, then NAME is set\n"
2317	" to that word. If the line is empty, WORDS and the prompt are\n"
2318	" redisplayed. If EOF is read, the command completes. Any other\n"
2319	" value read causes NAME to be set to null. The line read is saved\n"
2320	" in the variable REPLY. COMMANDS are executed after each selection\n"
2321	" until a break command is executed."
2322	msgstr ""
2323
2324	#: builtins.c:1144
2325	msgid ""
2326	" Execute PIPELINE and print a summary of the real time, user CPU time,\n"
2327	" and system CPU time spent executing PIPELINE when it terminates.\n"
2328	" The return status is the return status of PIPELINE. The `-p' option\n"
2329	" prints the timing summary in a slightly different format. This uses\n"
2330	" the value of the TIMEFORMAT variable as the output format."
2331	msgstr ""
2332
2333	#: builtins.c:1154
2334	msgid ""
2335	" Selectively execute COMMANDS based upon WORD matching PATTERN. The\n"
2336	" `\|' is used to separate multiple patterns."
2337	msgstr ""
2338
2339	#: builtins.c:1161
2340	msgid ""
2341	" The `if COMMANDS' list is executed. If its exit status is zero, then the\n"
2342	" `then COMMANDS' list is executed. Otherwise, each `elif COMMANDS' list "
2343	"is\n"
2344	" executed in turn, and if its exit status is zero, the corresponding\n"
2345	" `then COMMANDS' list is executed and the if command completes. "
2346	"Otherwise,\n"
2347	" the `else COMMANDS' list is executed, if present. The exit status of "
2348	"the\n"
2349	" entire construct is the exit status of the last command executed, or "
2350	"zero\n"
2351	" if no condition tested true."
2352	msgstr ""
2353
2354	#: builtins.c:1173
2355	msgid ""
2356	" Expand and execute COMMANDS as long as the final command in the\n"
2357	" `while' COMMANDS has an exit status of zero."
2358	msgstr ""
2359
2360	#: builtins.c:1180
2361	msgid ""
2362	" Expand and execute COMMANDS as long as the final command in the\n"
2363	" `until' COMMANDS has an exit status which is not zero."
2364	msgstr ""
2365
2366	#: builtins.c:1187
2367	msgid ""
2368	" Create a simple command invoked by NAME which runs COMMANDS.\n"
2369	" Arguments on the command line along with NAME are passed to the\n"
2370	" function as $0 .. $n."
2371	msgstr ""
2372
2373	#: builtins.c:1195
2374	msgid ""
2375	" Run a set of commands in a group. This is one way to redirect an\n"
2376	" entire set of commands."
2377	msgstr ""
2378
2379	#: builtins.c:1202
2380	msgid ""
2381	" Equivalent to the JOB_SPEC argument to the `fg' command. Resume a\n"
2382	" stopped or background job. JOB_SPEC can specify either a job name\n"
2383	" or a job number. Following JOB_SPEC with a `&' places the job in\n"
2384	" the background, as if the job specification had been supplied as an\n"
2385	" argument to `bg'."
2386	msgstr ""
2387
2388	#: builtins.c:1212
2389	msgid ""
2390	" The EXPRESSION is evaluated according to the rules for arithmetic\n"
2391	" evaluation. Equivalent to \"let EXPRESSION\"."
2392	msgstr ""
2393
2394	#: builtins.c:1219
2395	msgid ""
2396	" Returns a status of 0 or 1 depending on the evaluation of the conditional\n"
2397	" expression EXPRESSION. Expressions are composed of the same primaries "
2398	"used\n"
2399	" by the `test' builtin, and may be combined using the following "
2400	"operators\n"
2401	" \n"
2402	" \t( EXPRESSION )\tReturns the value of EXPRESSION\n"
2403	" \t! EXPRESSION\tTrue if EXPRESSION is false; else false\n"
2404	" \tEXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
2405	" \tEXPR1 \|\| EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
2406	" \n"
2407	" When the `==' and `!=' operators are used, the string to the right of "
2408	"the\n"
2409	" operator is used as a pattern and pattern matching is performed. The\n"
2410	" && and \|\| operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
2411	" determine the expression's value."
2412	msgstr ""
2413
2414	#: builtins.c:1237
2415	msgid ""
2416	" BASH_VERSION Version information for this Bash.\n"
2417	" CDPATH A colon-separated list of directories to search\n"
2418	" \t\tfor directries given as arguments to `cd'.\n"
2419	" GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
2420	" \t\tbe ignored by pathname expansion.\n"
2421	" HISTFILE The name of the file where your command history is "
2422	"stored.\n"
2423	" HISTFILESIZE The maximum number of lines this file can contain.\n"
2424	" HISTSIZE The maximum number of history lines that a running\n"
2425	" \t\tshell can access.\n"
2426	" HOME The complete pathname to your login directory.\n"
2427	" HOSTNAME\tThe name of the current host.\n"
2428	" HOSTTYPE The type of CPU this version of Bash is running under.\n"
2429	" IGNOREEOF Controls the action of the shell on receipt of an EOF\n"
2430	" \t\tcharacter as the sole input. If set, then the value\n"
2431	" \t\tof it is the number of EOF characters that can be seen\n"
2432	" \t\tin a row on an empty line before the shell will exit\n"
2433	" \t\t(default 10). When unset, EOF signifies the end of input.\n"
2434	" MACHTYPE\tA string describing the current system Bash is running on.\n"
2435	" MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
2436	" MAILPATH\tA colon-separated list of filenames which Bash checks\n"
2437	" \t\tfor new mail.\n"
2438	" OSTYPE\t\tThe version of Unix this version of Bash is running on.\n"
2439	" PATH A colon-separated list of directories to search when\n"
2440	" \t\tlooking for commands.\n"
2441	" PROMPT_COMMAND A command to be executed before the printing of each\n"
2442	" \t\tprimary prompt.\n"
2443	" PS1 The primary prompt string.\n"
2444	" PS2 The secondary prompt string.\n"
2445	" PWD\t\tThe full pathname of the current directory.\n"
2446	" SHELLOPTS\tA colon-separated list of enabled shell options.\n"
2447	" TERM The name of the current terminal type.\n"
2448	" TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
2449	" \t\t`time' reserved word.\n"
2450	" auto_resume Non-null means a command word appearing on a line by\n"
2451	" \t\titself is first looked for in the list of currently\n"
2452	" \t\tstopped jobs. If found there, that job is foregrounded.\n"
2453	" \t\tA value of `exact' means that the command word must\n"
2454	" \t\texactly match a command in the list of stopped jobs. A\n"
2455	" \t\tvalue of `substring' means that the command word must\n"
2456	" \t\tmatch a substring of the job. Any other value means that\n"
2457	" \t\tthe command must be a prefix of a stopped job.\n"
2458	" histchars Characters controlling history expansion and quick\n"
2459	" \t\tsubstitution. The first character is the history\n"
2460	" \t\tsubstitution character, usually `!'. The second is\n"
2461	" \t\tthe `quick substitution' character, usually `^'. The\n"
2462	" \t\tthird is the `history comment' character, usually `#'.\n"
2463	" HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
2464	" \t\tcommands should be saved on the history list.\n"
2465	msgstr ""
2466
2467	#: builtins.c:1292
2468	msgid ""
2469	" Adds a directory to the top of the directory stack, or rotates\n"
2470	" the stack, making the new top of the stack the current working\n"
2471	" directory. With no arguments, exchanges the top two directories.\n"
2472	" \n"
2473	" +N\tRotates the stack so that the Nth directory (counting\n"
2474	" \tfrom the left of the list shown by `dirs', starting with\n"
2475	" \tzero) is at the top.\n"
2476	" \n"
2477	" -N\tRotates the stack so that the Nth directory (counting\n"
2478	" \tfrom the right of the list shown by `dirs', starting with\n"
2479	" \tzero) is at the top.\n"
2480	" \n"
2481	" -n\tsuppress the normal change of directory when adding directories\n"
2482	" \tto the stack, so only the stack is manipulated.\n"
2483	" \n"
2484	" dir\tadds DIR to the directory stack at the top, making it the\n"
2485	" \tnew current working directory.\n"
2486	" \n"
2487	" You can see the directory stack with the `dirs' command."
2488	msgstr ""
2489
2490	#: builtins.c:1318
2491	msgid ""
2492	" Removes entries from the directory stack. With no arguments,\n"
2493	" removes the top directory from the stack, and cd's to the new\n"
2494	" top directory.\n"
2495	" \n"
2496	" +N\tremoves the Nth entry counting from the left of the list\n"
2497	" \tshown by `dirs', starting with zero. For example: `popd +0'\n"
2498	" \tremoves the first directory, `popd +1' the second.\n"
2499	" \n"
2500	" -N\tremoves the Nth entry counting from the right of the list\n"
2501	" \tshown by `dirs', starting with zero. For example: `popd -0'\n"
2502	" \tremoves the last directory, `popd -1' the next to last.\n"
2503	" \n"
2504	" -n\tsuppress the normal change of directory when removing directories\n"
2505	" \tfrom the stack, so only the stack is manipulated.\n"
2506	" \n"
2507	" You can see the directory stack with the `dirs' command."
2508	msgstr ""
2509
2510	#: builtins.c:1341
2511	msgid ""
2512	" Display the list of currently remembered directories. Directories\n"
2513	" find their way onto the list with the `pushd' command; you can get\n"
2514	" back up through the list with the `popd' command.\n"
2515	" \n"
2516	" The -l flag specifies that `dirs' should not print shorthand versions\n"
2517	" of directories which are relative to your home directory. This means\n"
2518	" that `~/bin' might be displayed as `/homes/bfox/bin'. The -v flag\n"
2519	" causes `dirs' to print the directory stack with one entry per line,\n"
2520	" prepending the directory name with its position in the stack. The -p\n"
2521	" flag does the same thing, but the stack position is not prepended.\n"
2522	" The -c flag clears the directory stack by deleting all of the elements.\n"
2523	" \n"
2524	" +N\tdisplays the Nth entry counting from the left of the list shown by\n"
2525	" \tdirs when invoked without options, starting with zero.\n"
2526	" \n"
2527	" -N\tdisplays the Nth entry counting from the right of the list shown by\n"
2528	" \tdirs when invoked without options, starting with zero."
2529	msgstr ""
2530
2531	#: builtins.c:1364
2532	msgid ""
2533	" Toggle the values of variables controlling optional behavior.\n"
2534	" The -s flag means to enable (set) each OPTNAME; the -u flag\n"
2535	" unsets each OPTNAME. The -q flag suppresses output; the exit\n"
2536	" status indicates whether each OPTNAME is set or unset. The -o\n"
2537	" option restricts the OPTNAMEs to those defined for use with\n"
2538	" `set -o'. With no options, or with the -p option, a list of all\n"
2539	" settable options is displayed, with an indication of whether or\n"
2540	" not each is set."
2541	msgstr ""
2542
2543	#: builtins.c:1377
2544	msgid ""
2545	" printf formats and prints ARGUMENTS under control of the FORMAT. FORMAT\n"
2546	" is a character string which contains three types of objects: plain\n"
2547	" characters, which are simply copied to standard output, character "
2548	"escape\n"
2549	" sequences which are converted and copied to the standard output, and\n"
2550	" format specifications, each of which causes printing of the next "
2551	"successive\n"
2552	" argument. In addition to the standard printf(1) formats, %b means to\n"
2553	" expand backslash escape sequences in the corresponding argument, and %q\n"
2554	" means to quote the argument in a way that can be reused as shell input.\n"
2555	" If the -v option is supplied, the output is placed into the value of "
2556	"the\n"
2557	" shell variable VAR rather than being sent to the standard output."
2558	msgstr ""
2559
2560	#: builtins.c:1393
2561	msgid ""
2562	" For each NAME, specify how arguments are to be completed.\n"
2563	" If the -p option is supplied, or if no options are supplied, existing\n"
2564	" completion specifications are printed in a way that allows them to be\n"
2565	" reused as input. The -r option removes a completion specification for\n"
2566	" each NAME, or, if no NAMEs are supplied, all completion specifications."
2567	msgstr ""
2568	" Указва как да се допълват аргументите за всяко име.\n"
2569	" Ако е зададена опцията -p, или не са зададени никакви опции, съществуващите\n"
2570	" класове допълвания се отпечатват по начин, който позволява да се използват\n"
2571	" за вход. Опцията -r премахва клас допълвяния за всяко ИМЕ, а ако не е\n"
2572	" дадено такова, се махат всички класове."
2573
2574	#: builtins.c:1405
2575	msgid ""
2576	" Display the possible completions depending on the options. Intended\n"
2577	" to be used from within a shell function generating possible "
2578	"completions.\n"
2579	" If the optional WORD argument is supplied, matches against WORD are\n"
2580	" generated."
2581	msgstr ""
2582	" Показване на възможните допълвания на базата на възможностите. Целта е да се\n"
2583	" ползва в рамките функция на обвивката, която генерира възможните допълвания.\n"
2584	" Ако е зададен незадължителният аргумент ДУМА, генерират се напсванията с\n"
2585	" него."

Note: See TracBrowser for help on using the repository browser.

Download in other formats: